Metadata for 2004 Color Aerial Photos, Yellowstone River Corridor, Stillwater, Yellowstone, and Dawson Counties, Montana
Identification Information:
- Citation:
- Originator: Merrick & Company
- Publication date: 07/11/2005
- Title:
- 2004 Color Aerial Photos, Yellowstone River Corridor, Stillwater, Yellowstone, and Dawson Counties, Montana
- Publication place: Helena, MT
- Publisher: Montana State Library
- Online linkage:
http://geoinfo.montanastatelibrary.org/data/aerialphotos/
- Abstract:
- Color Aerial photos of the Yellowstone River floodplain in Stillwater, Yellowstone, and Dawson Counties, Montana. Photos are georeferenced and georectified, and have a ground resolution of 0.3 meters, or approximately one foot. The photographs were taken on May 1 and 2, 2004.
- Purpose:
- This coverage was created as part of a joint Yellowstone River Conservation Districts Council and U.S. Army Corps of Engineers, Omaha District cumulative impacts study of the Yellowstone River channel and floodplain. The multi-agency interdisciplinary planning study extends 477 river miles from Sweetgrass County, Montana to the Missouri River confluence in McKenzie County, North Dakota. It is specifically intended to support the hydraulic, geomorphic, biologic and socioeconomic analyses that are part of the planning study. The first phase of the mapping focused on Stillwater, Yellowstone and Dawson Counties in Montana and included approximately 295 square miles of floodplain.
These high resolution (30 cm) digital images are intended to serve as a base for the project GIS and were acquired to support a wide variety of analyses including: digital surface model development (topographic base for hydraulic floodplain delineation), planimetric data extraction (infrastructure, riverine geomorphology, land cover, habitat and vegetation), and as a base map for monitoring long-term river channel changes.
- Time period of content:
- Beginning date: 05/01/2004
- Ending date: 05/02/2004
- Currentness reference: ground condition
- Status:
- Progress: Complete
- Maintenance and update frequency: As needed
- Access constraints: None
- Use constraints:
- The Montana State Library provides this product/service for informational purposes only. The Library did not produce it for, nor is it suitable for legal, engineering, or surveying purposes. Consumers of this information should review or consult the primary data and information sources to ascertain the viability of the information for their purposes. The Library provides these data in good faith but does not represent or warrant its accuracy, adequacy, or completeness. In no event shall the Library be liable for any incorrect results or analysis; any direct, indirect, special, or consequential damages to any party; or any lost profits arising out of or in connection with the use or the inability to use the data or the services provided. The Library makes these data and services available as a convenience to the public, and for no other purpose. The Library reserves the right to change or revise published data and/or services at any time.
- Point of contact:
- Nicole McClain
- Project Coordinator
- Yellowstone River Conservation District Council (YRCDC)
- PO Box 148
- Livingston,
Montana 59047
- Telephone: (406) 223-5702
- Fax: (406) 222-9992
- E-Mail: nmcclain@mt.gov
Back to Top
Data Quality Information:
- Attribute accuracy report:
- During photographic reproduction of the source photography, limited analog dodging is performed to improve image quality. Analog dodging consists of holding back light from certain areas of the sensitized photographic material to avoid overexposure. Image color values may deviate from color values of the original imagery due to image value interpolation during the scanning and rectification process. Radiometry is verified by visual inspection of the ortho image.
- Completeness report:
- All orthoimagery is visually inspected for completeness to ensure that no gaps, hard seam lines, or shifting has occurred. All images are clipped to the tile extent and radiometrically balanced with surrounding images. All images are cloud free and source photography is flown leaf-on.
- Horizontal Positional Accuracy Report:
- The ortho imagery horizontal positional accuracy and the assurance of that accuracy depend, in part, on the accuracy of the data inputs to the rectification process. These inputs consist of the digital terrain model (DTM), fully digital analytic aerotriangulation (FDAAT) control and methods, the photo source camera calibration, scanner calibration, and aerial photographs. The orthoimagery output from these inputs meet National Map Accuracy Standards (NMAS). Aerial cameras have current certification from the USGS, National Mapping Division, Optical Science Laboratory. Test calibration scans are performed on all source photography scanners.
- Lineage:
- Source information:
- Originator: Aerial Surveys International, LLC
- Publication date: Unpublished material
- Title: Color Photography
- Publication place: Watkins, CO
- Publisher: Aerial Surveys International, LLC
- Source scale denominator: 15840
- Type of source media: filmstrip
- Source contribution: Film supplied for scanning.
- Calendar date: 05/01/2004
- Calendar date: 05/02/2004
- Source information:
- Originator: Merrick & Company
- Publication date: 09/01/2004
- Title: Fully Digital Analytical Aerotriangulation Report (FDAAT)
- Publication place: Aurora, CO
- Publisher: Merrick & Company
- Source contribution: Control network result with camera calibration information
- Calendar date: 09/01/2004
- Source information:
- Originator: Merrick & Company
- Publication date: Unpublished material
- Title: Ground Control
- Source contribution: Survey data for aerotriangulation and data quality control.
- Calendar date: 08/05/2004
- Source information:
- Originator: U.S. Geological Survey
- Publication date: 02/11/2002
- Title:
- Report of Calibration of Aerial Mapping Camera; USGS Report No. OSL/2825
- Publication place: Reston, VA
- Publisher: U.S. Geological Survey
- Type of source media: disc, paper
- Source contribution: Camera calibration parameters
- Calendar date: 02/11/2002
- Source information:
- Originator: Merrick & Company
- Title: Digital Terrain Model (DTM)
- Publication place: Aurora, CO
- Publisher: Merrick & Company
- Type of source media: online
- Source contribution:
- The digital terrain model (DTM) was created from LIDAR data and from supplemental data compiled from aerial photography. The DTM meets National Map Accuracy Standards.
- Process step:
- The digital orthophotography was rectified from the color aerial photography. The color film negatives were scanned at an input resolution of fourteen microns for input resolution of one-third meter (0.33m). The orthoimagery was rectified to the DTM data and aerotriangulation results using Cubic Convolution methodology. The ortho imagery was mosaicked and radiometrically balanced to ensure tonal consistency. The final pixel resolution is 30cm. Said orthoimagery meets National Map Accuracy Standards.
-
- Process date: 02/09/2005
- Process contact:
- Doug Jacoby
- Senior Project Manager
- 2450 South Peoria Street
- Aurora,
CO 80014
- Telephone: 303-353-3903
- Fax: 303-745-0964
- E-Mail: doug.jacoby@merrick.com
- Contact instructions: Call or email during business hours
Back to Top
Spatial Data Organization Information:
- Raster object information:
- Raster object type: Pixel
- Number of bands: 3
- Vertical count: 1
Back to Top
Spatial Reference Information:
- Horizontal coordinate system definition:
- Grid coordinate system name: State Plane Coordinate System
- SPCS zone identifier: 2500
- Lambert conformal conic:
- Standard parallel: 45.000000
- Standard parallel: 49.000000
- Longitude of central meridian: -109.500000
- Latitude of projection origin: 44.250000
- False easting: 600000.000000
- False northing: 0.000000
- Planar distance units: meters
- Geodetic model:
- Horizontal datum name: North American Datum of 1983
- Ellipsoid name: Geodetic Reference System 80
- Semi-major axis: 6378137.000000
- Denominator of flattening ratio: 298.257222
Back to Top
Distribution Information:
- Distributor:
- Montana State Library
- PO Box 201800
- Helena,
MT 59620-1800
- Telephone: 406-444-5354
- TDD/TTY telephone: 406-444-4799
- Fax: 406-444-0266
- E-Mail: geoinfo@mt.gov
- Resource description: Downloadable Data
- Distribution liability:
- The Montana State Library provides this product/service for informational purposes only. The Library did not produce it for, nor is it suitable for legal, engineering, or surveying purposes. Consumers of this information should review or consult the primary data and information sources to ascertain the viability of the information for their purposes. The Library provides these data in good faith but does not represent or warrant its accuracy, adequacy, or completeness. In no event shall the Library be liable for any incorrect results or analysis; any direct, indirect, special, or consequential damages to any party; or any lost profits arising out of or in connection with the use or the inability to use the data or the services provided. The Library makes these data and services available as a convenience to the public, and for no other purpose. The Library reserves the right to change or revise published data and/or services at any time.
- Standard order process:
- Digital form:
- Format name: MrSID image
- Online option:
http://apps.msl.mt.gov/Geographic_Information/Data/Aerial_Photos/yellowstone_stillwater_col_2004.aspx- Online option:
http://apps.msl.mt.gov/Geographic_Information/Data/Aerial_Photos/yellowstone_westyell_col_2004.aspx- Online option:
http://apps.msl.mt.gov/Geographic_Information/Data/Aerial_Photos/yellowstone_eastyell_col_2004.aspx- Online option:
http://apps.msl.mt.gov/Geographic_Information/Data/Aerial_Photos/yellowstone_dawson_col_2004.aspx
Back to Top
Metadata Reference Information:
- Metadata date: 07/19/2013
- Metadata review date: 04/17/2013
- Metadata review date: 05/12/2005
- Metadata contact:
- Andy Morris
- ArcGIS Services Manager
- Merrick & Company
- 2450 South Peoria Street
- Aurora,
CO 80014
- Telephone: 303-353-3929
- Telephone: 303-751-0741
- Fax: 303-745-0964
- E-Mail: andy.morris@merrick.com
- Contact instructions: Call or email during business hours
Back to Top